Service Products FAQ Payment Contact us About us
wheeled tractor/implement battery tractor snow tractor skid loader

China Best Products PD  series 120 to 410hp track dozer

120hp

BRIEF INTRODUCTION TO SHANGHAI PD120
TRACK TYPE BULLDOZER

Engine
* Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model
Dongfeng 6135K-2a

Tracks
Type
inline vertical four-stroke cycle semi-open combustion chamber
Type
Assembled,Single grouse
Flywheel(kW)
88.2(120PS)
Track pitch (mm)
203
Rated speed(r/min)
1500
Track width (mm)
500
No.of cylinders-bore×strock(mm)
6-φ135×140
No .of track shoes （each side）
37
Starting method
 Electric starting 24V 8kw
Length of track on ground( mm)
2465
Battery
     
Ground clearance (mm)
>300
Air cleaner
K2640X-la paper element cyclone air cleaner
Track gauge (mm)
1880

Transmission system
Ground pressure ( Mpa )
0.063
Main clutch
Dry ,Multiple-disc ,Non-constantly engaged

Hydraulic control system
Transmission
spur gears ,splash lubricated , 5 forward and 4 reverse speeds
Working pressure (Mpa)
12
Bevel gear
helical bevel gear ,splash lubricated
Rated delivery (L/min)  (at 1700r/min)
210
Steering clutch
dry ,multiple disc hand-operated with hydraulic booster
Pump
CBL 4140 gear pump
Steering brake
dry ,band brake ,foot-actuated
Control valve
hand operated ,sling type
Final drive
spur gear ,double reduction ,splash lubricated
Valve position
raise ,hold ,lower ,float

Travel speed(Km/h)
Cylinder bore × rod × stroke (mm)
φ100×φ50×850
  
1st
2nd
3rd
4th
5th

Work equipment
Forward
2.25
3.61
5.15
7.42
10.34
Blade type
straight
angle
Reverse
2.7
4.33
6.18
8.91
　
Width × Height (mm)
3200×1130　
3760×1000

Undercarriage
Max .lift above ground (mm)
1020
990
Sprocket

segmented
Max .drop below (mm)
360
335
No.of track rollers（each side）
5 (3 single，2 double flanged)
Pitch adjustment( ° )
53
55
No.of carrier rollers（each side）

2

Bit lifting speed（m/s)
>0.35
≥0.32
No.of front idler（each side）

1

Gradeability( ° )
≤30

≤30

Track tension
hydraulic adjusted
  
  
  • Shanghai Dongfeng diesel engine with ample horsepower and long-servicelife
  •  Mechanical transmission system with reliable performance and easier maintenance
  • Normal model PD120, plateau model 120A-G, exavator 120A(BH) etc. suitable for all kinds of engineering projects
  •   Selectable works attachments: angle blade straight blade, ripper, winch etc.

 

140hp

BRIEF INTRODUCTION TO SHANGHAI PD140、PD140S
TRACK TYPE BULLDOZER

Engine

 * Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model
Dongfeng 6135AK-8

Tracks
Type
inline vertical four-stroke cycle semi-open combustion chamber
 Type
Assembled,Single grouse
Flywheel(kW)
103(140PS)
 　
PD140 
PD140 swamp
Track pitch(mm)
203
Rated speed(r/min)
1700
 Track width(mm)
500
1020
No.of cylinders-bore×strock(mm)
6-φ135×150
 No.of track shoes（each side）
37
43
Starting method
Electric starting 24V 8kw 
 Length of track on ground( mm)
2465
3114
Battery
lead storage cell,6-Q-195 (12V×2)
 Ground clearance(mm)
>300
400
Air cleaner
K2640X-la paper element cyclone air cleaner
 Track gauge(mm)
1880
2300

Transmission system

 Ground pressure(Mpa)
0.062
0.027
Main clutch Wet type,Multiple-disc, Non-constantly engaged

Hydraulic control system
Transmission spur gears,splash lubricated , 5 forward and 4 reverse speeds Working pressure(Mpa)
12
8.28
Bevel gear helical bevel gear,splash lubricated Rated delivery(L/min)(at 1700r/min)
238
Steering clutch dry,multiple disc hand-operated with hydraulic booster Pump
CBL 4140 gear pump
Steering brake dry,band brake,foot-actuated Control valve
hand operated,sling type
Final drive spur gear,double reduction,splash lubricated Valve position
raise,hold,lower,float

Travel speed(Km/h)

 Cylinder，bore×rod×stroke(mm) φ100×φ50×850 φ100×φ50×1010
  
1st
2nd
3rd
4th
5th

Work equipment
Forward
2.72
3.88
5.83
8.42
11.72
 Blade type straight angle straight
Reverse
3.27
4.66
7.00
10.09
　
 Width×Height(mm)
3200×1130
3760×1000
4000×970

Undercarriage

 Max.lift above ground(mm)
1020
990
1000
Sprocket segmented Max.drop below(mm)
360
335
350
　   PD140 PD140 Swamp Pitch adjustment( ° )
53
55
56
No.of track rollers（each side） 5 (3 single，2 double flanged) 7(4single flanged,3double flanged)
No.of carrier rollers（each side） 2 Bit lifting speed（m/s)
　  
  
  
No.of front idler（each side） 1 Gradeability( ° )
　30
30
30
Track tension hydraulic adjusted   
  

● Shanghai Dongfeng improved engine with high torque, low fuel consumption and long-servicelife
 ● Normal model PD140, swamp model PD140S and plateau model PD140G suitable for all kinds of engineering project
● Selectable equipments: angle blade, straight blade, ripper and winch etc.

 

165hp

BRIEF INTRODUCTION TO SHANGHAI PD165Y
TRACK TYPE BULLDOZER

Engine

 * Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model Dongfeng G6135G4 STEYR  WD 615T1-1 Cummins NT855

Tracks
Type  Vertical Four-Stroke  Turbocharged Vertical Four-Stroke Turbocharged Vertical Four-Stroke、PT Pump infection Type Sealed and lubricated Single grouser or Sealed Single grouser
Flywheel(kW) 122 122 122 Track pitch(mm) 203
Rated speed(r/min) 1850 1850 1850 Track width(mm) 560
No.of cylinders-bore×strock(mm) 6-φ135×150 6-φ126×130 6-φ139.7×152.4 No.of track shoes（each side） 37
Starting method Electric starting 24V 7.5kw  Electric starting 24V 7.5kw Electric starting    24V 7.5kw Length of track on ground( mm) 2430
Battery 24V(12V×2)-195AH 24V(12V×2)-195AH 24V(12V×2)-195AH Ground clearance(mm) 400
Air cleaner Dry horizontal type with precleaner Dry horizontal type with precleaner Dry horizontal type with precleaner Track gauge(mm) 1880
Transmission system
 Ground pressure(Mpa) 0.064
Torque converter 3-element,Single-stage,Single-phase
Hydraulic control system
Transmission Hand-operated,Hydraulic shift,Planetary gear, multiple-disc clutch,hydraulic-actuated, Forced lubrication by gear pump,3 forward and 3 reverse speeds. Working pressure(Mpa) 13.7
Bevel gear helical bevel gear,splash lubricated Rated delivery(L/min)(at 1700r/min) 250
Steering clutch wet,multiple disc,spring loaded, hand-operated with booster and hydraulic-released Pump CBJ70-E112R Gear pump
Steering brake wet,band brake,operated with hydraulic-released Control valve hand operated,slide valve
Final drive spur gear,double reduction,splash lubricated Valve position raise,hold,lower,float

Travel speed(Km/h)

 Cylinder，bore×rod×stroke(mm) φ110×φ65×1026
   1st 2nd 3rd

Work equipment
Forward 3.8 6.6 10.6 Blade type straight angle
Reverse 4.9 8.5 　13.6 Width×Height(mm) 3416×1150　 4019×1025

Undercarriage

 Max.lift above groud(mm) 1090 1110
Sprocket segmented Max.drop below(mm) 530 530
No.of track rollers（each side） 6 Pitch adjustment( ° )
55±2
 55
No.of carrier rollers（each side） 2 Bit lifting speed（m/s)
　
 　
No.of front idler（each side） 1 Gradeability( ° )
30
 30
Track tension

hydraulic adjusted

 Max.tilt(mm)
860
 　

 

220hp

BRIEF INTRODUCTION TO SHANGHAI PD220Y-1
TRACK TYPE BULLDOZER

Engine

 * Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model Cummins NT-885-C280

Tracks
Type Turbocharged,four-stroke      PD220Y-1 PD220YS PD220E
Type Sealed,Single grouse
Flywheel Power(kW) 162 Track pitch(mm) 216
Rated speed(r/min) 1800 Track width(mm)

560

 945 560
No.of cylinders-bore×strock(mm) 6-φ139.7×152.4 No.of track shoes（each side） 3738 45 41
Starting method starting motor 24V 11kw  Length of track on ground( mm) 2730 3490 3050
Battery 24V(12V×2)-195A  Ground clearance(mm) 405 450 405
Air cleaner Dry horizontal type with precleaner Track gauge(mm) 2000 2250 2000

Transmission system

 Ground pressure(Mpa) 0.078 0.038 0.074
Torque converter 3-element,single-stage, single-phase

Hydraulic control system
Transmission Planetary gear,multiple-disc clutch,hydraulic actuated, forced lubrication by gear pump,3 foward and 3 reverse speeds Working pressure(Mpa) 13.7
Bevel gear spiral bevel gear,splash lubricated Rated delivery(L/min) 257
Steering clutch wet,multiple disc clutch,spring loaded,hydraulically actuated Pump CBT 3160 gear pump
Steering brake wet,band brake,opererated with hydraulic booster and valve inner linkage Control valve hand-operated plunger servo controlling
Final drive spur gear,double reduction, splash lubricated Valve position raise,hold,lower,float

Travel speed(Km/h)

 Cylinder，bore×rod×stroke(mm) 120×70×1054 120x70x1293 120x70x1011
    1st 2nd 3rd

Work equipment
Forward 3.6 6.5 11.2 Blade type straight tilt blade
Reverse 4.3 7.7 　 Width×Height(mm) 3725×1315 4365×1260 3725×1315

Undercarriage

 Max.lift above ground(mm) 1210 1350 1210
Sprocket segmented Max.drop below(mm) 540 500 540
　    PD220Y-1 PD220YS PD220E
No.of track rollers（each side） (4single，2 double ) (3single，5 double ) (2single，5 double ) Pitch adjustment( ° ) 55 53°30' 55
No.of carrier rollers（each side） 2 Bit lifting speed（m/s) ≥0.35 ≥0.35 ≥0.35
No.of front idler（each side） 1 Gradeability( ° ) 30 30 30
Track tension
hydraulic adjusted
 Max.tilt(mm) 735 500 735

 

320hp

BRIEF INTRODUCTION TO SHANGHAI PD320Y-1
TRACK TYPE BULLDOZER

Engine

 * Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model Cummins NTA-855C

Tracks
Type
Turbocharged,four-stroke after cooled 
 Type
Sealed,Single grouse
Flywheel Power(kW)
239
 Track pitch(mm)
228.6
Rated speed(r/min)
2000
 Track width(mm)
560(or 610,760)
No.of cylinders-bore×strock(mm)
6-φ139.7×152.4
 No.of track shoes（each side）
41
Starting method
starting motor 24V 11kw 
 Length of track on ground( mm)
3150
Battery
24V(12V×2)-195Ah 
 Ground clearance(mm)
500
Air cleaner
Dry horizontal type with precleaner
 Track gauge(mm)
2140

Transmission system

 Ground pressure(Mpa)
0.094
Torque converter 3-element,single-stage, single-phase

Hydraulic control system
Transmission Planetary gear,multiple-disc clutch,hydraulic actuated, forced lubrication by gear pump,3 foward and 3 reverse speeds Working pressure(Mpa)
13.7
Bevel gear helical bevel gear,splash lubricated Rated delivery(L/min)
335
Steering clutch wet,multiple-disc clutch,spring loaded,hydraulically actuated Pump
CBZ 4200 gear pump
Steering brake wet,band brake,opererated with hydraulic booster Control valve
hand-operated plunger servo controlling
Final drive spur gear,double reduction, splash lubricated Valve position
raise,hold,lower,float

Travel speed(Km/h)

 Cylinder，bore×rod×stroke(mm)
140×75×1340
  
1st
2nd
3rd

Work equipment
Forward
3.6
6.6
11.5
 Blade type semi-U blade Angle
Reverse
4.4
7.8
　13.5
 Width×Height(mm)
4130×1590
4850×1140

Undercarriage

 Max.lift above ground(mm)
1560
1560
Sprocket
segmented
 Max.drop below(mm)
560
560
　  
　
No.of track rollers（each side）
2single，5 double
 Pitch adjustment( ° )
55±2
55±2
No.of carrier rollers（each side）
2
 Bit lifting speed（m/s)
　
No.of front idler（each side）
1
 Grade ability( ° )
30
Track tension
hydraulic adjusted
 Max.tilt(mm)
1000

● Cummins NTA855-C360 engine
 ● Advanced PD320Y has field of vision widely, control more nimbly and conveniently
● Mechatronics three-stage alarm electron monitor system
 ● Electron-hydraulic integration operating mechanism

 

410hp

BRIEF INTRODUCTION TO SHANGHAI PD410
TRACK TYPE BULLDOZER

Engine
* Floating seals are used in all track rollers,carrier rollers,sprocket and front idler
Model
Cummins KTA-19C

Tracks
Type
Turbocharged, after cooled, four-stroke
Type
Sealed and lubricated single grouse
Flywheel(kW)
306
Track pitch(mm)
260.6
Rated speed(r/min)
2000
Track width(mm)
610
No.of cylinders-bore×strock(mm)
6-φ159×159
No.of track shoes（each side）
39
Starting method
Electric starting 24V 11kw 
Length of track on ground( mm)
3360
Battery
24V (12V×2)-195Ah
Ground clearance(mm)
575
Air cleaner
Dry horizontal type with precleaner
Track gauge(mm)
2260

Transmission system
Ground pressure(Mpa)
≤0.112
Torque converter
3-element, single-stage, single-phase

Hydraulic control system
Transmission
Planetary gear, multiple-disc clutch, hydraulic actuated, (hand operated) forced lubrication by gear pump, 4 forward and reverse speeds
Working pressure(Mpa)
13.72
Bevel gear
helical bevel gear,splash lubricated
Rated delivery(L/min)(at 1700r/min)
404
Steering clutch
Wet, multiple-disc clutch, spring loaded, hydraulically actuated
Pump
PAL 200 gear pump
Steering brake
Wet, band brake, operated with hydraulic booster and valve inner linkage
Control valve
Hand-operated plunger servo controlling
Final drive
Single spur gear and planetary gear reduction, splash lubricated
Valve position
Raise, hold, lower, float

Travel speed(Km/h)

Cylinder bore×rod×stroke(mm)
φ160×φ90×1440
  
1st
2nd
3rd
4th
5th

Work equipment
Forward
0-3.3
0-5.1
0-8.5
0-12.7
  
Blade type
straight tilt blade
  
Reverse
0-3.2
0-5.0
0-8.4
0-12.6
　
Width×Height(mm)
4314×1875　
  

Undercarriage
Max.lift above ground(mm)
1545
  
Sprocket

segmented
Max.drop below(mm)
700
  
No.of track rollers（each side）
7 (2 single, 5 double flanged)
Pitch adjustment( ° )
52
  
No.of carrier rollers（each side）
2
Bit lifting speed（m/s)
≥0.35
  
No.of front idler（each side）
1
Gradeability( ° )
30
  
Track tension
hydraulic adjusted
  Max. tilt(mm)
1000

 

All other tractors and implements

Ask us